Ascher Racing renew its best seller with new features and shapes. This new version comes to use USB platform independent connection.
IMAGES
FEATURES
Compared to its previous model, the F64-USB V2 features new 12-position switches which provide improved feedback, a closed shape and motorsport rubber grips.
- Improved grip ergonomics including slightly larger diameter, thinner lower section, different top shape to push top button
- Rubber grips:
- are not showing any tear
- offers much more grip
- perfect hardness (not too soft, not too hard) for much easier endurance racing without getting exhausted
- can be used without using gloves (also with sweaty hands)
- better hygienics
- new 12-position rotary knob
- better usability in “encoder mode” (rotational symmetry)
- much better feedback
64 Inputs
- 12 x push buttons with positive tactile feeling
- 2 x protective button guards
- 2 x multifunctional 7-way joysticks (4 directions / rotate clock- anticlockwise/ push button)
- 4 x encoders inc. push button functionality, aluminum knob
- 2 x 12-position rotary switches, aluminum knob
- 2 x paddle shifters
- 2 x clutch paddles with electronic bite-point calibration
Magnetic Paddle Shifters
- cnc machined and anodized out of automotive aluminum
- strong snap-action force
- alternative magnets to reduce force included
- reliable automotive switch
Contactless Clutch Paddles
- cnc machined and anodized out of automotive aluminum
- contactless hall sensor
- smooth operation for maximum control
electronic bite-point calibration
- precise adjustments in 1.0 % and 0.1 % increments
- change bite-point via configuration tool or directly on the wheel rim:
- push both joystick buttons for 1s to access bite-point mode
- LED lights up to indicate calibration mode
- rotate left joystick for 1.0 % increments / right joystick for 0.1 % increments (LED flashes to indicate changes)
- exit calibration mode by pushing both joysticks again for 1s
- recommended procedure for finding best setting:
- enter calibration mode and set bite-point to high value, e.g. 80 %
- pull slave clutch only
- apply throttle
- reduce bite-point in 1.0 % increments (left joystick) until vehicle starts moving
- make test starts to fine tune desired bite-point setting
- exit bite-point calibration mode
- recommended procedure for quick race starts
- pull both master and slave clutches
- apply throttle
- race start -> let master clutch snap
- it will take less than 20 ms to reach desired bite-point
- slowly release slave clutch
High Quality Finish
- Maximum grip level from closed, ergonomic rubber grips
- machined out of automitive aluminium
- black anodized and laser engraved
- brushed frontplate surface finish
- glass bed blasted paddle surface finish
Button Labels
- 50 pcs button labels each black and white
- 72 pcs encoder labels (blue, green, red, black, yellow, white)
- labels for various common steering wheel inputs
General Information
- 285 mm wheel diameter
- 6 x 70 mm bolt pattern
- robust, shielded coiled cable with industrial Binder M16 connector
- coiled cable connector length approx. 64mm
- spacer may be required to create sufficient clearance to the wheel base
- M5 x 12 mm stainless screws to mount QR included
- Quick Release not included
- to mount M5 threaded QRs, use captive screws
- mass: 1140 g
Compatible Wheelbases
- Simucube 2
- Simucube 1 (OSW, Mige)
- Accuforce*
- Leo Bodnar**
- OSW (Argon)**
- Simagic*
- VRS Direct Force***
- Fanatec Podium Hub*
* captive screws are required
** Wheelbase comes without QR
*** longer screws are required
COMPATIBILITY
- PC: YES
- PlayStation: NO
- XBox One: NO
- XBox Series S|X: NO
PRICING
1099,00€ (VAT included)
WEBSITE
Ascher Racing F64-USB V3This website uses affiliate links which may earn a commission at no additional cost to you.