Ascher Racing renew its best seller with new features and shapes. This new version comes to use USB platform independent connection.
IMAGES
FEATURES
Compared to its previous model, the F64-USB V2 features new 12-position switches which provide improved feedback, a closed shape and motorsport rubber grips.
Improved grip ergonomics including slightly larger diameter, thinner lower section, different top shape to push top button
Rubber grips:
are not showing any tear
offers much more grip
perfect hardness (not too soft, not too hard) for much easier endurance racing without getting exhausted
can be used without using gloves (also with sweaty hands)
better hygienics
new 12-position rotary knob
better usability in “encoder mode” (rotational symmetry)
much better feedback
64 Inputs
12 x push buttons with positive tactile feeling
2 x protective button guards
2 x multifunctional 7-way joysticks (4 directions / rotate clock- anticlockwise/ push button)
4 x encoders inc. push button functionality, aluminum knob
2 x 12-position rotary switches, aluminum knob
2 x paddle shifters
2 x clutch paddles with electronic bite-point calibration
Magnetic Paddle Shifters
cnc machined and anodized out of automotive aluminum
strong snap-action force
alternative magnets to reduce force included
reliable automotive switch
Contactless Clutch Paddles
cnc machined and anodized out of automotive aluminum
contactless hall sensor
smooth operation for maximum control
electronic bite-point calibration
precise adjustments in 1.0 % and 0.1 % increments
change bite-point via configuration tool or directly on the wheel rim:
push both joystick buttons for 1s to access bite-point mode
LED lights up to indicate calibration mode
rotate left joystick for 1.0 % increments / right joystick for 0.1 % increments (LED flashes to indicate changes)
exit calibration mode by pushing both joysticks again for 1s
recommended procedure for finding best setting:
enter calibration mode and set bite-point to high value, e.g. 80 %
pull slave clutch only
apply throttle
reduce bite-point in 1.0 % increments (left joystick) until vehicle starts moving
make test starts to fine tune desired bite-point setting
exit bite-point calibration mode
recommended procedure for quick race starts
pull both master and slave clutches
apply throttle
race start -> let master clutch snap
it will take less than 20 ms to reach desired bite-point
slowly release slave clutch
High Quality Finish
Maximum grip level from closed, ergonomic rubber grips
machined out of automitive aluminium
black anodized and laser engraved
brushed frontplate surface finish
glass bed blasted paddle surface finish
Button Labels
50 pcs button labels each black and white
72 pcs encoder labels (blue, green, red, black, yellow, white)
labels for various common steering wheel inputs
General Information
285 mm wheel diameter
6 x 70 mm bolt pattern
robust, shielded coiled cable with industrial Binder M16 connector
coiled cable connector length approx. 64mm
spacer may be required to create sufficient clearance to the wheel base
M5 x 12 mm stainless screws to mount QR included
Quick Release not included
to mount M5 threaded QRs, use captive screws
mass: 1140 g
Compatible Wheelbases
Simucube 2
Simucube 1 (OSW, Mige )
Accuforce *
Leo Bodnar**
OSW (Argon)**
Simagic *
VRS Direct Force***
Fanatec Podium Hub*
* captive screws are required
** Wheelbase comes without QR
*** longer screws are required
COMPATIBILITY
PC: YES
PlayStation: NO
XBox One: NO
XBox Series S|X: NO
PRICING
1099,00€ (VAT included)
WEBSITE
Ascher Racing F64-USB V3
This website uses affiliate links which may earn a commission at no additional cost to you.