Official Fanatec recommendations for different PS4 games, in this case Project Cars 2.
- The following settings are considered reasonable reference values for Project CARS 2 (PS4).
- They may not suit all tastes and driving styles, but they are a good starting point. Keep in mind that Project CARS 2 uses a dynamic physics engine that covers a wide range of cars and tracks, which means that these settings may not be “optimal” for all possible driving scenarios.
- To correctly apply the suggested settings, it is important to assign the settings menu and game values together.
- For the Podium series settings, it is assumed that Torque Key is being used.
- Make sure you are using the latest firmware for all Fanatec devices.
Fanatec Podium Racing Wheel F1 PS4
(Firmware v651 or higher is required)
Settings menu:
SEN 1080 (shown as 108 on some screens)
FF 40
SHO 100
ABS User Preference
FOR 100
SPR 100 *
DPR 100 *
NDP 25
NFR 16
BRF User Preference
FEI 80
* SPR only affects steering wheel centering in the menu. DPR values have no effect.
In-Game Settings (Force Feedback Menu):
Note: select the ClubSport V2 base before performing address calibration.
Flavor: Raw **
Gain: 100
Volume: 60
Tone: 50
FX: 50
CSL Elite Wheel Base + / CSL Elite Racing Wheel PS4™
Tuning Menu Settings:
SEN 1080 (shown as 108 on some displays)
FF 100
SHO 100
ABS User Preference
DRI -03
FOR 100
SPR 100 *
DPR 100 *
BRF User Preference
FEI 070
* SPR only affects the centering of the steering wheel in the menu. DPR values have no effect.
In-Game Settings (Force Feedback Menu):
Flavor: Raw
Gain: 100
Volume: 60
Tone: 50
FX: 50
