advertisement
Update: as Efrain said in comments, settings are for small MiGe and Beano profile.
I usually don’t play with MMOS settings. Once you find a good configuration giving you a solid confidence in what you are doing, moving and testing become more difficult and harder. Anyway iRacing is not the only sim I played with last months and at least some people will find very interesting using others too.
Remember load only, don’t save to EEPROM which has limited writes unless you want to used it by default.
[iR BoxThisLap] Drehwinkel=900 LockGain=1000 LockMax=10000 DeviceFilter=5 DeviceMin=0 DeviceMax=10000 DamperFilter=0 FrictionFilter=0 InertiaFilter=0 DesktopEffect=2 DesktopEffectForce=2000 DesktopEffectSaturation=2000 UserEffect=2 UserEffectForce=2000 UserEffectSaturation=2000 [iR M.Ascher] Drehwinkel=900 LockGain=2800 LockMax=10000 DeviceFilter=10 DeviceMin=0 DeviceMax=10000 DamperFilter=0 FrictionFilter=0 InertiaFilter=0 DesktopEffect=2 DesktopEffectForce=2000 DesktopEffectSaturation=10000 UserEffect=2 UserEffectForce=2545 UserEffectSaturation=10000 [iR Sascha v2] Drehwinkel=900 LockGain=1000 LockMax=10000 DeviceFilter=7 DeviceMin=0 DeviceMax=10000 DamperFilter=0 FrictionFilter=0 InertiaFilter=0 DesktopEffect=2 DesktopEffectForce=2800 DesktopEffectSaturation=2000 UserEffect=2 UserEffectForce=2800 UserEffectSaturation=2000 [iRacing AG] Drehwinkel=900 LockGain=5000 LockMax=10000 DeviceFilter=12 DeviceMin=0 DeviceMax=10000 DamperFilter=0 FrictionFilter=0 InertiaFilter=0 DesktopEffect=2 DesktopEffectForce=8000 DesktopEffectSaturation=3000 UserEffect=2 UserEffectForce=8000 UserEffectSaturation=3000 [Assetto Daniel] Drehwinkel=900 LockGain=4330 LockMax=10000 DeviceFilter=7 DeviceMin=0 DeviceMax=10000 DamperFilter=30 FrictionFilter=30 InertiaFilter=30 DesktopEffect=2 DesktopEffectForce=2800 DesktopEffectSaturation=2000 UserEffect=2 UserEffectForce=2800 UserEffectSaturation=2000 [Assetto David] Drehwinkel=900 LockGain=5050 LockMax=5055 DeviceFilter=3 DeviceMin=0 DeviceMax=10000 DamperFilter=0 FrictionFilter=0 InertiaFilter=0 DesktopEffect=0 DesktopEffectForce=0 DesktopEffectSaturation=0 UserEffect=0 UserEffectForce=0 UserEffectSaturation=0 [Dirt Rally David] Drehwinkel=450 LockGain=6220 LockMax=10000 DeviceFilter=0 DeviceMin=0 DeviceMax=10000 DamperFilter=40 FrictionFilter=9 InertiaFilter=5 DesktopEffect=2 DesktopEffectForce=3273 DesktopEffectSaturation=0364 UserEffect=2 UserEffectForce=3273 UserEffectSaturation=0364
Now, more in game settings:
Assetto Corsa combos:
another one:
Dirt Rally:
iRacing: This is simple, check linear mode, FFB enabled and damping oscillations. 0 min force and 0 damping and set your strength to your desired force (mine it’s between 48 and 55nm)
With the recent introduction of rain in iRacing, the simulation has taken a significant step…
We have compiled the stock status of Fanatec products for those looking to venture into…
EA Sports WRC finally incorporates VR on April 30 in a free update that will…
Fanatec, known for producing simracing peripherals has announced is renewing its partnership with Formula 1.…
In this article, we'll delve into the intricacies of CPU bottlenecks, particularly in the context…
Lamborghini's note about its eSports event on . It will allow simracers to engross Lamborghini…
advertisement
View Comments
Thanks :)
Hey gonzalo, there articles are breeze of fresh air when first starting to set up an OSW. However, because of each servo being different (e.g. Are those settings for a small mige or for the kollmorgen in the picture? Also, the ffb is initially determined by the current value in Granity software. Then can be limited by Mmos and then the IRacing slider's value in linear Nm affects the force inversely, so a higher number results in actually less force in the sim.
It would be great to have a bit of a deep dive to demystify how ffb. Since you have a great community here reading about osw, may I suggest inviting some guests to clarify the topic? Active community members like Beano and Jason J, and suppliers like Tomo could provide input that you can edit into one of these awesome articles you write.
Let me know if I can help in any way,
Ef
Yep, small Mige with Beano default profile.
I already offered many times to write more technical details or considerations about OSW and Direct Drive wheels. We have been always open to publish anything to help or clarify these points. Jason, Beano and specially Tomo are free to write here ;) really everybody can help us writing articles or post about FFB topic.
Thank you Efrain!
Hi, I was a relief to find some info on settings, I bought a full motions sim and its a nightmare true nightmare to sort out. I have absolutely no clue how to even start and what all the settings mean. Is there a benchmark upon which to start. Please help
This is not for motion but the Open Sim Wheel compatible builds. If you are using motion you should contact with your provider and ask for support. Every motion system has its own software to be managed.