Ben Kautt made a comparison of three popular steering wheel rims used to race GT cars. The size of these rims make them also suitable to race open wheel cars and many simracers has been choosing one of them to complete their OSW builds. I am the owner of an Sparco P310, which diameter fits better my needs than bigger steering wheel rims.
The P310 came first. I definitely got caught by my boss playing with this in the office right after I opened it. I’m sure my face looked like I just got caught watching porn
The first, and biggest, thing I noticed was the back side of the rim where it connects to the cross braces (not sure exactly what these are called). There is a “lip” for your fingers to wrap around, so-to-speak. With the Mod 30, it’s pretty smooth/flat at that spot. The difference is when I grip the P310, my fingers naturally wrap around the rim and feel comfortable. With the Mod 30, my fingers have to flatten out at that connection and feel awkward, un-natural, and like I have less control of the wheel. Now, it wasn’t perfect. It definitely felt like my fingers were being squished to actually take advantage of this lip, since the diameter of the rim itself (the portion your hands wrap around, not the 310 diameter of the wheel) was thinner than the other two wheels. On a similar note, there was only a small amount of shaping for the hands, which didn’t really fit my hands well. Here’s a picture of the back of the rim:
The suede seemed to be smoother/finer on this wheel too. Didn’t make a difference to my grip as I use gloves with silicone grips; they don’t destroy the suede but also grip everything.
This is also the smallest diameter rim at 310mm. Technically, this means it’s harder for your arms to apply the same amount of torque that you can apply to a 330mm rim. However, when driving the C6.R, I didn’t actually notice much of a difference in my arms between this wheel vs the others. It was a little easier to turn with heavily loaded tires and deal with the high FFB with the OMP vs the P310, but the grip of the OMP definitely had a bit to do with this as well, more to come on that…
One other thing is that this wheel has a slight cushion on the rim beneath the suede, feels like hard rubber. If you’ve ever firmly pressed on a lacrosse ball, the P310 is almost identical. This has pros and cons: pro being that it cushions your wrists and fingers from the FFB, con being that it cushions the FFB
As I said earlier, this has a flat(ish) back side where it connects to the cross braces. I just hated the feeling, didn’t mater how I moved my hands while driving, it always bugged me and felt like I didn’t have a good grip on the wheel. The actual portion of the rim that your hands wrap around for a grip was shaped much better than the P310 though. I wasn’t able to get a picture of the back of this wheel, since I already returned it by the time I wrote this, sorry.
This had the middle diameter of the 3, at 320mm. Again, this does make a difference, but I don’t feel like this should be a huge deterministic factor between these wheels.
The Mod 30 had just a little cushion on the rim, definitely the least of the 3. It was there, just not noticeable unless I pressed decently hard on it with my finger. Hmmm, these aren’t exactly scientific comparisons are they? Maybe I should have gotten a durometer…oh well
This ended up being my favorite. Actually, it didn’t really “end up” being the favorite, it was my favorite 5 minutes into driving it. The shaping for the hands is absolutely perfect! It gives more room for the thumbs where they wrap around the rim, so there’s no pressure or friction on them while driving. There is a shaping/cutout/lip (whatever you want to call it) on the back of the rim that is shaped for your fingers with a slight ridge between each finger to keep them there. Granted, this is related to MY hand, so yours may be different, but I can’t really use your hand now can I?
This had the largest diameter at 330mm, but the flat portion on the bottom keeps it clear of my legs.
This also had the most cushioning. It’s still a hard rubber feeling, so it’s not like gripping a foam ball. In the lacrosse ball example, it’s a hair softer than that. I didn’t mind this at all while driving. Didn’t notice any softness in the wheel after driving for an hour, and when going directly from the Mod 30 to this, I didn’t feel like the OMP was significantly softer or that the FFB felt softened.
Obviously I liked the OMP the most. Mostly because it fit my hand the best while still feeling great after driving for a little over an hour. Hope this helped someone. There’s only so much I can describe and talk about between 3 different wheels, but those were the thoughts that hit my mind when trying them out.
For those who don't know, the base code of iRacing dates back a long time,…
Fanatec unveils an new offer! The highly anticipated ClubSport DD F1® Esports V2 bundle is…
We have been many months without talking about one of the most played games on…
The excitement is building as the NASCAR Cup Series gears up for a memorable return…
iRacing releases the fourth patch typically received following the new build of this season. We'll…
The F1 returns this weekend to the sprint format after the first weekend we experienced…