A couples of weeks ago, I finished my IONI building based wheel, an OSW derivative steering wheel. There have been a few months of reading and trying to understand how the wiring and the electronics components worked together. I had to wait for some things, many many weeks, and some others were hard to find but finally the soldering nightmare went away and everything worked.
From my first reading on this matter, when Ascher’s Argon guide was the main source to build an OSW, up to now, the popularity of these projects has grown dramatically. To help newcomers to evaluate the complexity of the task, Jason Sandlin and Jason Jordaski are working in an extensive guide.
This guide covers:
It is still a work in progress but helps a lot if you choose to enter the most exciting DIY simracing project right now.
UPDATED: Barry’s review is out!
For those who don't know, the base code of iRacing dates back a long time,…
Fanatec unveils an new offer! The highly anticipated ClubSport DD F1® Esports V2 bundle is…
We have been many months without talking about one of the most played games on…
The excitement is building as the NASCAR Cup Series gears up for a memorable return…
iRacing releases the fourth patch typically received following the new build of this season. We'll…
The F1 returns this weekend to the sprint format after the first weekend we experienced…
View Comments
Thanks for this great material. I just started gathering needed parts. BTW I'm using IONI HC PRO Drive rather than IONI PRO Drive. Can I use the wiring scheme as it is?
There is no problem exchanging IONI PRO and IONI PRO HC. It is an upgrade allowing to run bigger motors.
Link is dead where can i read it?
Now it is working. Anyway you have modern alternatives to DIY, as Simracingbay.com, Augury, etc.